MyAlarm iFob Control
By MyAlarm Pty Ltd
NOTE:
This app requires a compatible safety system and an interactive MyAlarm service plan to function.
Contact your MyAlarm Registered Installer to discuss plans and options before purchasing the app.
DESCRIPTION:
The MyAlarm iFob Control app offers real time control and suggestions of suitable, IP enabled alarm systems.
Reporting of alarm events via Push notification and email is also out there if required.
Users can arm and disarm areas, management outputs and doors, view system troubles and alarm system historical past as required.
All events performed through the app are recorded in the system history log.
App users are required to use their regular alarm PIN when using the app allowing the alarm system to limit the user to only functions, areas and doors they have entry to. Multiple sites are supported permitting simple interface to your house, office and holiday home etc if required.
Once on a MyAlarm service plan the system proprietor can create an account on the www.myalarm.com.au website, where they'll assign access for up to 10 iFob users for every alarm system. Various app functions can be restricted by the system owner if required giving them total control.
If you're doubtful tips on how to set these options contact your MyAlarm registered installer for help.
COMPATIBILITY:
The iFob app is currently only suitable with the panels listed beneath.
Most older version panels may be upgraded to satisfy the firmware necessities by your alarm installer.
If you wouldn't have one of many methods listed then don't download the app.
PANELS:
* Bosch - Solution 144 Alarm Panel (via firmware upgrade to Solution 6000 v2.23 and higher)
* Bosch - Solution 6000 Alarm Panel (v2.23 and higher)
* Digiflex - Vision-X Alarm Panel (v2.23 and higher)
IP CONNECTIVITY OPTIONS:
* CM751 Ethernet module (v2.16)
or
* CM744 3G Radio module
or
*CP740 WiFi Enabled Graphic Keypad
REQUIREMENTS:
For the iFob Control app to function your system needs to meet the compatibility necessities listed above.
Your system must have been put in and configured for MyAlarm providers and you will need to join a MyAlarm service plan together with your installer.
A MyAlarm Customer account is required to setup the iFob Control app users on your system.
Contact your MyAlarm installer for more info concerning your alarm system configuration and MyAlarm service plan options.
EVERY alarm system can be smart!With PROTEGUS you will always know what is going on at your home or workplace with real-time notifications and remote control. PROTEGUS platform offers you a simple method to management any existing or new alarm system from smartphone or utilizing ...
Smart management, with a twist!Get connectedGet in controlGet comfortWith the eTwist and the eTwist app you'll have the ability to adjust the temperature with a twist of the wrist. Quickly, easily and precisely, wherever you are.Heat through your tablet or sm...
This app is suitable with Verisure installations in Belgium, Denmark, Finland, Germany, Netherlands, Norway, and Sweden. For alarm methods in France or the UK, this app is simply compatible with VBox installations. If you have a FAST system, please use the next app as a substitut...
Stream and report out of your sensible digital camera system with the Verisure Cameras app.Set up motion and audio detection and the camera will document any detected motion or sound.With this app, you'll find a way to change the following digicam settings:* Motion detecti...
Please note: The phrases of use are fully seen only in case the font dimension has been set to “Normal” or “small”. Please examine your device-settings. If the firmwareupdate was not processed accurately and the gaetway is shortly not reachable, disconnect the gateway from all energy su...
